SOMMER USH-9, Manual

Page: 14 / 132

3.2 Configure the USH-9
1. Select language, decimal character, units and decimal places (see General settings )
2. Select the measurement trigger (see Measurement trigger )
3. Configure the USH-9 for the required application (see Configuring the USH-9 for snow meas-
urements and Configuring the USH-9 for water level measurements )
4. Define scope and structure of the data output (see General settings )
5. Optional: Configure analog outputs (see Analog output )
6. Send any modifications to the USH-9 by clicking Upload modified parameters to device .
3.3 Acquire measurements
1. Establish a connection to your device as described in Working with connections .
2. Download the setup of your device as described in Download setup .
3. Select the Measurement (F3) tab.
4. In the Commands section click Start polling measurement . Now, the Commander will trigger
measurements of the USH-9 without any delays between measurements. The results are dis-
played
Measurement values and plotted in the Measurement data graph .
5. To finish polling mode click Stop polling .
3
G
et
st
ar
te
d
14 Manual