![background image](http://html.mh-extra.com/html/somfy/oximo-40-solar-io/oximo-40-solar-io_manual_1317489004.webp)
2
EN
Oximo 40 Solar io
Copyright
©
2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
1. PRIOR INFORMATION
1.1. FIELD OF APPLICATION
OXIMO40 drives are designed to drive
all types of roller shutter (with or without a rigid link, with or without stop,
etc.).
The professional drive and home automation installer must ensure that, once installed, the installation of
the motorised product complies with the standards in force in the country in which it is commissioned, in
particular
standard EN 13659 on roller shutters
.
1.2. LIABILITY
Please read
these instructions carefully
before installing and using the drive. In addition to following the
instructions given in this guide, the instructions detailed in the attached
Safety instructions
document must also
be observed.
The drive must be installed by a drive and home automation professional, in accordance with Somfy’s
instructions and the applicable regulations in the country of installation.
Any use of the drive outside the field of application described above is prohibited. Such use, and any failure to
comply with the instructions given in this guide and in the attached
Safety instructions,
document, absolves
Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the drive and must
provide them with the instructions for operation and maintenance as well as the attached
Safety instructions
document after installing the drive. Any After-Sales Service operation on the drive requires intervention by a
drive and home automation professional.
If in doubt when installing the drive, or to obtain additional information, contact a Somfy adviser or visit the
website www.somfy.com.
2. INSTALLATION
Warning
• These instructions are
mandatory
for the drive and home automation professional installing the drive.
• Comply with current standards and legislation in the country of installation.
Attention
• Never drop, knock or puncture the drive or immerse it in liquid.
• Install an individual control point for each drive.
͉
Installation recommendations:
The three elements comprising the kit must be installed on the same
side of the roller shutter (Oximo 40 Solar io motor, 3.2 W SOLAR
PANEL and either an Oximo WireFree Battery /12V NAKED
BATTERY or an Oximo WIreFree Battery Stick).
2.1. ASSEMBLY
2.1.1. Preparing the drive installation
͉
Check that the inner diameter of the motorized product’s tube is
greater than or equal to 37 mm.
1) Fit the accessories required to integrate the drive into the roller
tube:
-
the crown (
a
) and the wheel (
b
) on the drive.
2) Measure the length (
L1
) between the inner edge of the drive
head and the rim of the drive wheel.
1)
L1
L1 = …
2)
L1
L1 = …
)4
)1
)2