![background image](http://html.mh-extra.com/html/somfy/oximo-40-solar-io/oximo-40-solar-io_manual_1317489011.webp)
9
EN
Oximo 40 Solar io
Copyright
©
2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
2.4.2. Replacing a lost or broken Somfy control point
Attention
The double cut-out must be implemented at the drive connection point.
͉
This reset deletes all the local control points, however the end limit settings and favourite (my) position are retained.
1) Disconnect the drive (connector
A
) from the Y cable
(connector
B
) for 10 s.
2) Reconnect the drive (
A
) to the Y cable (
B
) for between 10 s
and 15 s.
3) Disconnect the drive (
A
) from the Y cable (
B
) for 10 s.
4) Reconnect the drive (
A
) to the Y cable (
B
): the motorised
product moves for a few seconds. (If the application is in the
upper or lower limit position, it will make a brief up and down
movement).
5) Press the PROG button on the new control point until the
motorised product moves up and down: the new control point is
programmed and all the other control points are deleted.
2.4.3. Restoring the original configuration
Attention
The double cut-out must be implemented at the connection point with the drive.
͉
This reset deletes all the control points and all the end limit settings, and resets the drive’s favourite (my) position.
1) Position the motorised product at the mid-height position (if
possible).
2) Disconnect the drive (connector
A
) from the Y cable
(connector
B
) for 10 s.
3) Reconnect the drive (
A
) to the Y cable (
B
) for between 10 s
and 15 s.
4) Disconnect the drive (
A
) from the Y cable (
B
) for 10 s.
5) Reconnect the drive (
A
) to the Y cable (
B
): the motorised
product moves for a few seconds. (If the application is in the
upper or lower limit position, it will make a brief up and down
movement).
6) Press the PROG button on the Somfy local control point
for
≈ 7 s until
the motorised product
moves up and down twice
: the
drive is reset to the original configuration.
Resume the commissioning operation (
see 2.3.
).
1 2
4 3
X2
my
4)
5)
2)
3)
6)
1)
PROG. 7
s
10 s
OFF
A
B
10 s - 15 s
ON
A
B
10 s
OFF
A
B
ON
A
B
1 2
4 3
4)
2)
10 s
OFF
3)
10 s - 15 s
ON
5)
1)
PROG.
A
B
A
B
10 s
OFF
A
B
ON
A
B