4
EN
Oximo 40 Solar io
Copyright
©
2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
2.2. WIRING
Precaution
• Standard NF C 15-100 for electrical installations must be adhered to.
• To ensure electrical safety, this class III drive must be recharged by a “SELV” voltage source (Safety Extra
Low Voltage).
Attention
• Cables which pass through a metal wall must be protected and isolated using a sheath or sleeve.
• Attach cables to prevent any contact with moving parts.
• If the drive is used outdoors and if the power supply cable is of type H05-VVF, route the cable in a UV-
resistant duct, e.g. trunking.
• The drive cable cannot be removed. If it is damaged, return the drive to the After-Sales department.
• Leave the drive power supply cable accessible: it must be easy to replace.
• To guarantee good radio reception, do not cut the external antenna.
• The cables and connectors must be protected from the roller shutter movement.
• Somfy recommends placing the connectors behind the end piece and securing the cables inside the roller
shutter housing.
1) Wire the 4-pin drive connector (
A
) to the 4-pin Y cable connector (
B
).
2) Wire the 2-pin battery connector (
C
) to the 2-pin Y cable connector (
D
).
3) Wire the 2-pin solar panel connector (
E
) to the 4-pin Y cable connector (
F
)
D
C
B
A
F
E