4
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
2. Safety - Important information
2.1 Installation and commissioning
Before installing and using the Telis 4 RTS, please carefully read these
instructions, which describe how to install, commission and operate the
Telis 4 RTS.
Never begin installing without first checking the compatibility of the Telis
4 RTS with the associated equipment and accessories.
Any incorrect use will invalidate the warranty and Somfy's liability.
2.2 Operating
Somfy recommends that at least one control point is located close to
-
the product or group of products.
Do not allow children to play with the fixed control points. Keep remote
-
controls out of the reach of children.
Monitor the product (especially roller shutter/awning/garage door/gate)
-
while it is moving, especially during commissioning of the Telis 4 RTS,
and keep people at a distance until the product is completely closed.
Make sure the power supply to the product is turned off before any
-
maintenance operation in the vicinity of the product (for example, when
cleaning windows near your blind).
Avoid moving the product if ice has formed in it, unless the motor is
-
fitted with anti-freeze protection.
Do not leave the Telis 4 RTS behind a window in full sunlight: the Telis
-
4 cannot withstand temperatures greater than 60°C.
Do not leave the Telis 4 RTS in a car in winter.
-
Do not immerse or soak the Telis 4 RTS in any liquid.
-
Only use maintenance products recommended by Somfy.
-
Frequently check the product (e.g. awning) to detect any defects in
-
balance or any signs of wear. Do not use the product if a repair or
adjustment is required.
