20
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
6.5 Situo control point
Move close to the product to install the
Telis 4 RTS.
6.5.1 Adding the Telis 4 RTS
Bring the product to the midway
-
position.
-
Remove the front cover from the Situo:
Gently remove the front cover with a
-
flat, pointed tool (such as a flathead
screwdriver) around the lower
section.
Lever it and lift the cover, without
-
using force, to detach the mounting
lugs from the front cover.
Turn the front cover over: the
-
PROG button is located next to the
battery (d).
-
Press the PROG button (d) on the
Situo until the product moves briefly
(or a series of 3 beeps is emitted): the
programming function is activated for
approximately 2 minutes.
Take the new Telis 4 RTS.
-
-
Press the Selection button (E) to light
up the indicator light that corresponds to
the channel to which the product will be
associated.
-
Press the PROG button (F) on the new
Telis 4 RTS briefly with the tip of a pencil:
the product will make another brief
movement (or emit a series of 8 beeps)
to indicate that the new Telis 4 RTS is
stored.
Press the Down button on the new Telis
-
4 RTS:
If the product is lowered, the
-
Telis 4 RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
d
E
F
