22
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
-
Press the PROG button (F) on the
new Telis 4 RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
4 RTS is stored.
-
Press the Down button on the new Telis
4 RTS:
If the product is lowered, the
-
Telis 4 RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
6.7 Telis 4 RTS/Telis 4 Soliris
RTS remote controls
The Telis 4 RTS (6a) and Telis 4 Soliris
RTS (6b) have 4 indicator lights.
Move close to the product to install the
Telis 4 RTS.
6.7.1 Adding a new Telis 4 RTS
On the original Telis, select the indica-
-
tor light which controls the product only,
with button (f).
Bring the product to the midway
-
position.
Turn the original Telis over: the PROG
-
button (g) is located on the rear panel.
-
Press the PROG button (g) with the tip
of a pencil until the product moves brie-
fly (or a series of 3 beeps is emitted):
the programming function is activated
for approximately 2 minutes.
Take the new Telis 4 RTS.
-
F
6a
6b
f
g
