18
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
-
Press the Down button on the new Telis
4 RTS:
If the product is lowered, the
-
Telis 4 RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
Replace the original control point front
-
cover:
Insert the mounting lugs into their
-
notches on one side of the front
cover.
Press on the other side until it clicks,
-
to fix the front cover in its bracket.
6.4 Timer
Move close to the product to install the
Telis 4 RTS.
6.4.1 Checking the compatibility
-
Bring the product to the midway
position.
Cut off the mains power supply or
-
detach the battery connected to the
motor (eg for a battery operated roller
blind).
Remove the front cover:
-
Lever it with a flat, pointed tool
-
(such as a flathead screwdriver),
without using force, around the
upper section of the front cover to
detach it from its mounting.
-
The PROG button is located on top
of the screen and is shaped like a
tab (c).
Caution! If after removing the front cover,
no PROG button is found, this means
that the control point is not compatible:
the Telis 4 RTS cannot be linked to the
product.
c
