24
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
7.2 One lost or broken control point amongst others
Find one of the control points linked to the product.
-
Follow the steps described in the section "Adding the Telis 4 RTS"
-
according to the control point model.
Note: If, after having followed this operation, there is not a brief move-
ment (or a series of beeps) from the product, contact the Somfy assis-
tance service so they can provide guidance for the replacement.
8. Mounting the bracket
Somfy advises that the Telis 4 RTS is
installed in close proximity to the product
to which it is linked, to avoid it having to
perform any unnecessary searches.
The minimum distance which must be
kept between the two RTS control points
is: 30 cm.
-
Drill a 6mm diameter hole.
Push in the plug (4).
-
Fix the bracket (3) with the screw (5).
-
Screw the mounting pin (2) on the
-
bracket (3).
Hook the Telis 4 RTS (1) onto the
-
mounting pin (2).
Note: Do not attach the Telis 4 RTS to a
metal surface.
9. Everyday use of the
Telis 4 RTS
9.1 Channel selection
Press the selection button (E) to turn
-
on the indicator light that corresponds
to the product or group of products to
be controlled.
4
3
5
3
2
2
1
E
