UP button
STOP/IP button
DOWN button
Calendar button
SET button
Adjusting button
Display
Non-binding document. Products and references in this document are subject to change without prior notice. Please consult SOMFY
before using such references. © SOMFY 09/99
Basically valid for setting or changing values:
❑
Blinking values can be changed
❑
Always press
SET
to terminate and store input values
❑
If no input is entered for approximately 20 seconds, the input menu is automatically exited. The settings made up to that point are not stored.
Respect the electrical standards as well as the following points:
❑
disconnect the main before carrying out any work.
❑
ensure that no forces act on screw terminals after installation.
Cabling :
B
Programming:
3
❑
From winter time to summer time
1.
Press
briefly
➜
time blinks.
2.
Press
for longer than 5 seconds
➜
summer time.
3.
Press
briefly (store)
➜
time display.
❑
From summer time to winter time
1.
Press
briefly
➜
time blinks.
2.
Press
for longer than 5 seconds
➜
winter time.
3.
Press
briefly (store)
➜
time display.
Press
briefly
➜
time blinks.
Set time with
Press
briefly (store)
➜
time display stops blinking.
+
-
SET summer or winter time
SET time
1.
Press
briefly
➜
date display (if no input within 10 sec., the display
returns to the time)
2.
Press
briefly
➜
day blinks.
3.
Set day with
4.
Press
briefly
➜
month blinks.
5.
Set month with
6.
Press
briefly
➜
year blinks.
7.
Set year with
8.
Press
briefly (store)
➜
year stops blinking, time display.
The day of the week is set automatically.
The day, month, year selection can also be carried out in the opposite
direction using the
button.
+
-
+
-
+
-
SET date
Before setting the time, summer or winter time setting must be carried out. Factory setting is winter time.
Initial setting operation :
A
Year
Month
Day
Current Day
1 : Monday
2 : Tuesday
3 : Wednesday
4 : Thursday
5 : Friday
6 : Saturday
7 : Sunday
Min
Next automatic control
Hour
Summer/Winter time
SUPPLY
230V 50Hz
Phase
Neutral
Earth
LT motor
DOWN
PE
N
UP
N
L
N
MAIN
3 wires x 1,5 mm
2
Down
Up
Neutral
Earth
1 2
3
4
5
6
5 wires x 1,5 mm
2
4 wires x 0,75 mm
2
Screw terminal
of the junction box
Neutral
Earth
Phase
1 = Mains phase (
L
➜
)
2 = Mains neutral (
N
➜
)
3 = Earth
4 = Motor neutral (
N
)
5 = Motor Up (
▲
)
6 = Motor Down (
▼
)
Mains Neutral
Mains Phase
Motor Neutral
Motor UP
Motor DOWN
CHRONIS Uno bracket
“Frontal view”
CHRONIS Uno bracket
“Rear view”
