![background image](http://html.mh-extra.com/html/somfy/inteo-chronis-uno/inteo-chronis-uno_installation-manual_1317486004.webp)
C
Intermediate positions (only for roller shutter) :
With the CHRONIS Uno, it is possible to set one or two intermediate positions (IP) : one accessible from the top of
the shutter and one from the bottom.
To record these positions, the CHRONIS Uno has to record the time for the roller shutter to go from its top to the
IP, and also the time from its bottom one to the IP.
RECORD THE INTERMEDIATE POSITIONS
• To reach one of the intermediate positions, press briefly the
button of the CHRONIS UNO while the shutter is at its UP or DOWN
limits.
➭
The shutter will move and stop at the dedicated intermediate
position.
®
Using:
Set the roller shutter to the end limit
.
Press briefly the
button to reach the “IP”.
Press the
button until “DEL” is shown instead of
the operating mode.
4
REPRODUCE THE INTERMEDIATE POSITIONS
DELETE AN “IP” WITHOUT MEMORIZING A NEW ONE
Set the DRAPE mode
Press simultaneoustly
and
during 2s.
➜
(diA6)
is displayed.
Press
three times
briefly.
➜
(tiPP)
is displayed.
Change DRAPE mode with
➜
DEU
or
USA
are displayed.
The CHRONIS Uno is initially configured to control a roller shutter but it is possible to configure the CHRONIS Uno
to control a VENETIAN blind (orientation of the slats).
MOVE / STOP command
By pressing briefly the
or
push buttons, the shutter is activated in the corresponding direction.
By pressing briefly the
push button, the shutter stops.
Two different “Drape” modes can be set
❑
DEU
Impulse control shorter than 2 seconds
➜
Blind activated during the time of pressing.
Control longer than 2 seconds
➜
Blind activated during 3 minutes.
❑
USA
Impulse control shorter than 0.5s
➜
Blind activated during 3 minutes.
Control between 0.5s and 6s
➜
Blind activated during the time of pressing.
Control longer than 7s
➜
Blind activated during 3 minutes.
A
Roller shutter :
B
Venetian blind :
• Set the shutter at its
UP
limit
with the
push button.
1
• Push simultaneoustly on the
and
button until the
shutter begins to move down
(about 3s).
after
3 seconds
2
• Stop the shutter at the interme-
diate position you wish.
If necessary, adjust this position
with the push buttons.
3
• Push the
button during two
seconds.
➭
The CHRONIS Uno has memori-
zed the first intermediate position.
during
2 seconds
4
• Set the shutter at its
DOWN
limit with the
push button.
5
• Push simultaneoustly on the
and
button until the
shutter begins to move up
(about 3s).
after
3 seconds
6
• Stop the shutter at the interme-
diate position you wish.
If necessary, adjust this position
with the push buttons.
7
• Push the
button during two
seconds.
➭
The CHRONIS Uno has memori-
zed the first intermediate position.
STOP
STOP
during
2 seconds
8
IP1
IP2