SOMFY Elixo 500, Installation Manual

Page: 5 / 60

Copyright © 2008 Somfy SAS. All rights reserved.
3
EN
Elixo 500 24 V
Regularly check the condition of the gate. Gates in poor condition must be repaired, reinforced or even replaced. Check
that the various motorisation component’s screws and fittings are correctly tightened.
Before carrying out any work on the installation, switch off the power supply and/or disconnect any backup batteries.
Motorising an existing gate
Carry out a stress test with a measuring device which conforms to the requirements set out on in clause 5.1.1 of
standard EN 12445.
Contents of the standard kit
1 Elixo 24 V Motor x 1
2 Keygo x 2
3 RTS 3 m offset aerial x 1
Ground mounting kit:
4a Lag screws x 4
4b Nut x 8
4c Washer x 4
4d Plug x 4
4e Base plate x 1
5 Manual release handle assembly x 1
6 Handle locking key x 2
7 End limit brackets x 2
Description of the motorisation
1 Motor
2 Reduction unit with worm screws - helicoid drive wheel
3 Electro-mechanical end limit unit
4 Pinion
5 Manual release mechanism
6 Control unit
Battery pack (optional, ref. 9014612):
7a 2 backup batteries
7b Battery holder tray
7c Battery power supply management card
General motor size
Øp56
122
159
50
131
96
227
22
37
260
43
ProDuCt DEsCriPtioN
1
2
3
7
6 5
4a
4d
4e
4b 4c
2
3
4
7b
1
7a
5
7c
6