SOMFY Elixo 500, Installation Manual

Page: 6 / 60

4
Copyright © 2008 Somfy SAS. All rights reserved.
EN
Elixo 500 24 V
area of application
Sliding gates up to 500 kg and carrying out 30 operations per day.
To ensure the safety of all equipment and persons, respect the information given in the table:
For a gate weighing ... use ... Ref.
0 to 300 kg a passive rubber profile
on the end of the gate
9014597
300 to 500 kg a passive rubber profile
on the end of the gate
9014598
If using a different rubber profile to those listed above, ensure that the installation conforms with current regulations.
General view of a standard installation
A Motor
B Rack
C Aerial
D Amber light
E Set of photoelectric cells
F Keyswitch
G Passive rubber profile
H End limit brackets
i End stops in the ground
The motorisation must be disengaged during installation.
assembling the manual release handle
Insert the release handle into the specific housing on the motor. [1]
Tighten the release handle. [2]
Fit the screw cover. [3]
disengaging the motorisation
Turn the key a quarter of a turn to the left. [1]
Turn the release handle to the right. [2]
Do not forcibly push the gate. Hold the gate over its entire travel
during manual manoeuvres.
E
E
D
C
F
G
A
B
C
E
E
D
F
G
i
i
H
iNstallatioN