![background image](http://html1.mh-extra.com/html/somfy/digital-network-1860326/digital-network-1860326_programming-manual_1318028008.webp)
3. Modify the following Application Settings:
•
Manually change the IP Address Range:
Search for Gateways in a specified IP range [ex:192.168.0.1-255]
•
LLDP (Watts):
Only change if using a 100 Watt switch
•
Enable 60 Watt Support:
Set to
Enable
•
Multicast Discovery Control:
Set to
Enable
•
Computer’s IP Address:
Indicates the Multicast Discovery IP address of the commissioning computer and must
be later assigned the control server on-site or third-party control system IP address to communicate with
specific Gateways
•
Available IP’s:
Opens the Available IP addresses window (shown above)
•
View Debug Window:
Set to
Enable
when requested by Somfy Support for diagnostics
•
Batch Firmware Update:
See APPENDIX A of this guide to perform Gateway firmware updates
4. Click Save to apply all settings.
2. The Main Application window will display – Click Settings in the left pane to open the
Settings
page.
8 of 15
NOTE: Coordinate with the Network Administrator to confirm the appropriate network settings & requirements.
Application Settings are now set for discovering
PoE Gateways and programming Motors
A P P L I C A T I O N S E T T I N G S
1. Upon initial launch of the Somfy PoE Gateway
Application, the
Available IP addresses
window will
display – Select the applicable Ethernet or Wi-Fi
Connection Type
and
IP address
to discover all PoE
Gateways on the same network, then click Set.