1. Click the Green Triangle to collapse or expand details of each Gateway discovered.
•
The triangle color indicates Gateway connection status: GREEN = online, RED = offline
2. Edit the
“SomfyGateway”
name field to identify each individual Gateway.
3. Each Gateway will display an
IP Address
and
MAC Address –
Switch the Static / Dynamic toggle button to set
the Gateway to a static or dynamic IP address.
4. Use the
Gateway Control
buttons to control all motors connected to the PoE Gateway – See Motor Control
section of this guide.
5. Click the Groups button to assign motors to Groups – See Motor Group Assignment section of this guide.
6. The numbers to the right of the Groups button indicate the Gateway firmware version.
7. Click the Gear for individual
Gateway Settings
which includes the following options:
•
Remove
– Removes Gateway from the current Devices page (Gateway will reappear in next Search if connected)
•
Restart
– Power cycles the Gateway
•
Wink
– Jogs all tubular Motors connected to the Gateway with a short up/down movement
•
Control Grouped Motors
– Opens the Control Grouped Motors window to move specific groups of Motors –
See Motor Control section of this guide
•
Upgrade Firmware
– See APPENDIX A of this guide to perform Gateway firmware updates
IV. COMMISSIONING
G A T E W A Y D I S C O V E R Y
G A T E W A Y C O N F I G U R A T I O N
1. Click the Magnifying Glass at the top of the Devices page to start discovery.
•
The quantity of Gateways discovered will display
•
Gateways with Motors connected will appear first in the list, followed by Gateways without Motors connected
2. Use the Sort By drop-down to filter discovered Gateways by IP Address, Gateway Name or Gateways with
Motors connected.
9 of 15
