![background image](http://html1.mh-extra.com/html/somfy/digital-network-1860326/digital-network-1860326_programming-manual_1318028006.webp)
III. SET UP
C I S C O S W I T C H C O N F I G U R A T I O N
1. Download PuTTY software:
2. Open the PuTTY Configuration software
a. Select the Telnet radio button
b. In the Host Name (or IP address) field, enter the IP
address of the Cisco switch
NOTE: Obtained IP by the Network Administrato
r
c. In the Port field, enter 23
d. Click
Open
3. In the PuTTY Terminal under User Access Verification –
a. Type the switch Username, then press Enter [by default, the Username is “cisco”]
b. Type the switch Password, then press Enter [by default, the Password is “cisco” and will not appear while typed]
c. Listed in the PuTTY Terminal are the following lines highlighted in
BLACK
.
Next to each line, type the exact commands in
GREEN
, then press Enter to move to the next line:
•
Switch#
, type “
config t
”, then press Enter
•
Switch (config) #
, type “
interface range Fa1/0/1-8
”, then press Enter
NOTE: The above command will vary according to the Cisco switch model and ports available
•
Switch (config-if-range) #
, type “
no storm-control multicast level 50.00
”, then press Enter
•
Switch (config-if-range) #
, type “
no storm-control unicast level 50.00
”, then press Enter
•
Switch (config-if-range) #
, type “
no storm-control broadcast level 50.00
”, then press Enter
•
Switch (config-if-range) #
, type “
end
”, then press Enter
•
……Continue……..
Switch#
, type “
wr
”, then press Enter
•
……Wait to finish loading……
•
……Continue……..
Switch#
, type “
config t
”, then press Enter
•
Switch (config) #
, type “
coap proxy
”, then press Enter
•
Switch (config-coap-proxy) #
, type “
stop
”, then press Enter
•
Switch (config-coap-proxy) #
, type “
exit
”, then press Enter
•
Switch (config) #
, type “
no coap proxy
”, then press Enter
•
Switch (config) #
, type “
no ip igmp snooping
”, then press Enter
•
Switch (config) #
, type “
exit
”, then press Enter
•
……Continue……..
Switch#
, type “
wr
”, then press Enter
•
……Wait to finish loading……
* Cisco switch should be programmed by the Network Administrator. Contact Cisco for advanced support with switch configuration.
6 of 15
Cisco Switch Configuration is now complete