Use the
Gateway Control
buttons to control all motors connected to the PoE Gateway in order of Motor Node ID:
•
Up arrow moves all connected Motors to the upper limit
•
Down arrow moves all connected Motors to the lower limit
•
X stops all connected Motors from moving
•
% moves all connected Motors to a specified position
NOTE: By default, all connected Motors are assigned to this Group and Motors will move in order of Motor Node ID. The PoE Gateway allocates
power to Motors allowing (2) Sonesse 30 RS485 motors to operate at a time and only (1) Sonesse ULTRA 50 DC RS485 or (1) Irismo 35 Mini DC to
operate at a time.
3. Select a
Group
(1-5). Use the
Group Control
buttons at the
bottom of the window to control the Group:
•
Up arrow moves the Grouped Motors to the upper limit
in order of Priority
•
Down arrow moves the Grouped Motors to the lower
limit in order of Priority
•
X stops all moving Motors from moving (remaining
Motors do not move)
•
Stop and Align stops Motors that are in motion then
moves (aligns) remaining Motors to that position in
order of Priority
•
% moves the Grouped Motors to a specified percent or
Intermediate Position in order of Priority
GROUP CONTROL OF MOTORS:
NOTE: Use Control Grouped Motors for testing motor movements; no need to save changes unless modifying Groups.
Use the
Motor Control
buttons to control an individual Motor:
•
Up arrow moves the Motor to the upper limit
•
Down arrow moves the Motor to the lower limit
•
X stops the Motor from moving
•
% moves the Motor to a specified percent or Intermediate Position
INDIVIDUAL CONTROL OF MOTORS:
1. Click the
Gear
or the
Groups
button on the Devices page.
2. Click
Control Grouped Motors.
GATEWAY CONTROL OF MOTORS:
12 of 15
M O T O R C O N T R O L
