![background image](http://html1.mh-extra.com/html/somfy/digital-network-1860326/digital-network-1860326_programming-manual_1318028010.webp)
1. The Motor Labels field displays Motors (1-4) on this Gateway – Click a Motor from the column and edit the
name to identify each individual Motor.
•
ID indicates the factory Node ID assigned to each individual Motor – This unique ID cannot change
2. Click the Intermediate Positions button to open the
Intermediate Position Settings
window.
Setting Intermediate Positions
3. Use the Motor Controls to execute motor movements:
•
Up arrow moves the individual Motor to the upper limit
•
Down arrow moves the individual Motor to the lower limit
•
X stops the individual Motor from moving
•
% moves the individual Motor to a specified percent or
Intermediate Position
4. Program up to 16 positions between 0 and 100%:
•
Get retrieves all recorded Intermediate Positions
•
Set records the current Motor position to a selected slot
•
Goto moves Motor to selected Intermediate Position
•
Erase removes an individual recorded Intermediate Position
•
Erase All removes all recorded Intermediate Positions
5. Test the programmed Intermediate Positions:
•
Select a Position radio button (1-16)
•
Click the Goto button to move the Motor to the selected
Intermediate Position
OR
•
Click the % button
•
Select the Intermediate Position radio button
•
From the drop-down, select a desired Intermediate Position
(1-16)
•
Click the Start button to move the Motor to the selected
Intermediate Position
10 of 15
NOTE: Prior to configuring Motors with the PoE Gateway, Motor end limits must be set.
Intermediate Positions previously set with SDN Motor Configuration Software or RS485 Setting Tool are supported.
M O T O R C O N F I G U R A T I O N