Somex MAX40COD, Technical Document

Page: 23 / 45

BES00N5_166049_18/07/15 1(1) For definitions of terms, see main catalog
Subject to change
www.balluff.com
+49 (0) 7158 173-0, 173-370
1-800-543-8390
+86 (0) 21-50 644131
Internet
Balluff Germany
Balluff USA
Balluff China
BES 516-324-E4-C-PU-03
BES00N5
Inductive sensor
„
PNP
„
Normally open (NO)
„
1.50 mm
„
Flush (shielded)
„
Cable, PUR, 3.00 m
General attributes
Approvals / Conformity CE
cULus
Basic standard IEC 60947-5-2
Enclosure Type per IEC 60529 IP68 according to BWN PR 20
Function indicator Yes
Polarity reversal protected Yes
Power indicator No
Protection Class II
Short circuit protected Yes
Electrical attributes
Connection type Cable
Eff. operating current Ie 200 mA
Eff. operating voltage Ue DC 24.0 V
Electrical version DC, direct current
Load capacitance max. (at Ue) 0.500 µF
Max. no-load cur. Io undamped 3.0 mA
Minimum operating current Im 0 mA
No-load current Io damped max. 9.0 mA
Operating voltage UB max. DC [V] 30.0 V
Operating voltage UB min. DC [V] 10.0 V
Rated insulation voltage Ui 250 VAC
Rated short circuit current 100 A
Ripple max. (% of Ue) 15 %
Switching freq. f max. (at Ue) 3000 Hz
Switching function Normally open (NO)
Switching output PNP
Voltage drop static max. 2.5 V
Mechanical attributes
Ambient temperature Ta max. 70 °C
Ambient temperature Ta min. -25 °C
Assured operating distance Sa 1.20 mm
Cable diameter D max. 3.1 mm
Cable jacket material PUR
Cable length 3.00 m
Conductor cross-section 0.14 mm²
Depth 30.0 mm
Diameter d1 M08x1
Eff. operating distance Sr 1.50 mm
Housing material Stainless steel
Mech. installation condition Flush (shielded)
Mounting length 29.0 mm
Number of conductors 3
Rated operating distance Sn [mm] 1.50 mm
Sensing face material PBT
Tightening torque 8 Nm
Additional text
The sensor is functional again after the overload has been eliminated.