SOLTRON XL-75 DYNAMIC POWER, Operating Instructions Manual, Page: 33 / 154

32
How to use these operating instructions
There are headings above each section right at the top of the page so
that you can find the right page quickly. At the beginning of the section
the headings are large (1) and then on the following pages slightly small-
er (2).
Symbols are also used. There are several types of symbols:
• The sections are categorised by means of the symbols (3) in the over-
view on page 3.
• Symbols directly on top of a diagram (4) refer to the operating step
shown in the diagram.
The symbols are described in this section on page 33 and following.
Note:
The right to make technical modifications concerning the speci-
fications and information in these operating instructionsl is re-
served.
Reprinting and reproduction, in whole or in part, of this manual
is only permitted with our previous written approval and with
specification of the source.