SOLINTEG MHT-10K-25, User Manual

Page: 38 / 88

38
User Manual
MHT-4~20K series
② Insert one side of the RJ45 plug into the RJ45 port of terminal block.
Figure 5-17
③ Insert another side of the communication cable into the meter RS485 port or BMS CAN port.
①
Thread the cable of appropriate length through the swivel nut and the housing. Remove
the cable jacket and strip the wire insulation.
5.5.3 Connect Other Cables
Figure 5-18
Wir Wir e Diamete e Diamete rr
13~18mm 13~18mm
Cr Cross-sec oss-sec tional tional
Ar Area ea
0.5~1.5mm 0.5~1.5mm
22
55mm 55mm
8mm 8mm
Wire Diameterr
13~18mm
Cross-sectional Area
0.5~1.5mm
2
55mm
8mm
② (Optional) When using a multi-core multi-strand copper wire cable, connect the AC wire
head to the cord end terminal (hand-tight). In case of single-strand copper wire, skip this
step.