Solidyne 2600 serie, Owner'S Manual

Page: 27 / 45

•
To put the calling on-air, raise the main
fader (TELECOM) until reach the appropri-
ate level on VU meters.
NOTICE
Due to technical characteristics of the digital communica-
tion systems, when a conference involves lines and cell
phone or VoIP calling (like Skype), the caller who is talk-
ing from the land line can hear an echo of their own
voice. This echo is not present on the air.
3.4.4.2 END THE CALL
Make a short touch on the button "BLUETOOTH"
[21]. Or hang out from from the own cell phone.
3.4.4.3 Resume a call on the cell phone
To resume the call on cell phone; using the
phone menu leave the mode "Headset" (or mode
“Bluetooth”) to switch the phone to the "speaker"
mode (Speaker).
To return the call to the console, return to the
"Headset" mode. This operation differs in each
cell phone. Please consult the user’s manual of
the mobile phone.
Next shows a screen-shoot of a cell phone with
Android, with Bluetooth mode enabled.
The example shows the "Headset" icon, which
transfers the call to Bluetooth device when it is
power on; and return it to the phone when Head-
set mode is off. Others cell phones can display
two buttons; a button with dropdown options; or
other combinations. Refer to the cell phone
user’s manual.
3.4.4.4 Make a call from cell phone
In the cell phone, switch from mode "Bluetooth"
to mode "Headset" as was explained in "3.2.2.3 -
Resume a call on cell phone."
Dial the number in the cell phone and call
(SEND).
To transfer the call to the console, return to the
Bluetooth mode on the cell phone (see "3.4.4.3 -
Resume a call on cell phone").
Move the main fader TELECOM [9] to the zone
HOLD. The cell phone receives the program sig-
nal, but remains off-air.
To put the calling on the air, turn "AIR LEVEL" to
the correct volume.
To end the call from the console, short touch the
button "BLUETOOTH". The call can also be
ended from the mobile phone screen.
NOTES
The calling can be done from cell phone without
leave the Bluetooth mode, using the console's talk-
back circuit.
The ring tone and the voice of the caller listens on
CUE circuit (main fader closed in zone CUE).
To dialogue, use the button TALK [8] of TELECOM
channel.
To HOLD the call, move the main fader to the zone
HOLD.
To put the calling on-air, raise the main fader to on-
air zone
To end the call, make a short tap on button “BLUE-
TOOTH”; or hang-up from the cell phone.
3.2.5 Null factor
This adjustment is only for LAND lines. The rejec-
tion factor expresses the capacity of the hybrid to
avoid that the transmitted signal returns distorted to
the console. If the rejection factor is not well ad-
justed, it can produce coloration of the local voices
from Studio when a land line is on air. Please refer
to “2.6.1 – Null factor” to know how adjust the rejec-
tion factor.
solidynepro.com Broadcast mixing consoles - 2600 series Page 27