19
www.solencosa.co.za | [email protected] | 086 606 8915
E1 or E2
Temperature
sensor error
Ensure filters are clean, and use the unit
within the prescribed temperature range.
Unplug the unit, rest and plug
it back in. If error repeats, call the service
centre.
E3 or E4
Humidity sensor
error
Ensure filters are clean, and use the unit
within the prescribed temperature range.
Unplug the unit, rest and plug it back in. If
error repeats, call the service centre.
E5 or E6
Abnormal Coil
sensor
temperature or
current
Ensure filters are clean, and use the unit
within the prescribed humidity and
temperature range. Unplug the unit, rest and
plug it back in. If error repeats, call the
service
centre.
Defrost light
on
Unit is defrosting
Allow the unit to automatically defrost. The
protection will clear after the unit defrosts.
Increase temperature in the room if this
happens too often.
Tank full Red
light
Water tank full
notification
Tank is full or is not in the right position--
Empty the tank and
replace in the right position.
Any other malfunctions will need to be reported to Solenco service centre. Do not
attempt unauthorised repairs as these may invalidate the warranty.
