12
www.solencosa.co.za | [email protected] | 086 606 8915
Please Note: If a permanent drainage pipe is fitted, the unit will not stop
operation. Setting the desired humidity to around 35% is good for a drying boost,
on the units initial run, or in emergencies. It is not recommended to use it with
these settings for normal operation in domestic/ office environment over a long
period of time, as the air may become uncomfortably dry.
For allowing more moisture in the air, press the humidity button to set to a higher
percentage
value (e.g. 60-70%).
Humidity set to 50-55% RH - Recommended setting, great for domestic operation
and dry storage.
Humidity set to 60% RH - Great for personal comfort and applications where 50%
RH is considered too dry.
Other features and Indicators
Tank Full Light
The red light will illuminate and the unit will beep when the tank is ready to be
emptied, or if the water tank is incorrectly inserted. The water level control will
shut off the dehumidifier until the empty tank is replaced in its proper position
Auto Defrost
The appliance will automatically defrost if the coil sensor detects the
temperature is too low, to prevent ice from building up within the unit. The
defrost indicator will light up to show this mode is active. Once the defrosting
process has finished, the appliance will return to its previous running mode.
Humidistat control and fan/ compressor operation
When the selected humidity is 2% lower than the user selected humidistat setting;
the
dehumidifier’s
compressor will be shut off automatically but the fan will still
move to ensure air is not stale in the room. The unit will use only a minimal
amount of energy in fan mode.
When the humidity is equal or higher than user selected humidity the compressor
will restart once the 3 minutes delay compressor protection expires.
Auto-Restart (on some models)
If the unit stops unexpectedly due to a power cut, it will restart with the previous
function selected automatically when the power resumes.
