ENG - 4
03917401.ENG rev. 0
The operator in charge of installing and maintaining the engine must wear suitable CLOTHING for the workplace and the
situation; in particular, avoid loose clothes, chains, bracelets, rings and all other accessories that could become entangled with
moving parts..
The area in which the operator is working must be kept tidy and free of oil and other liquid spillages and solid waste (metal chips,
etc.).
Before starting work the operator must be aware of the position and operation of all commands and the characteristics of the
engine; make a daily check of the safety devices on the engine. Disabling or tampering with the safety devices on the engine is
strictly prohibited. Do not attempt to perform maintenance work adjustments or reset tings on moving parts on the engine; before
performing any of the above operations disconnect the electrical supply to ensure that no other persons can start the engine up
in the meantime.
Do not alter any parts of the engine (for example connections, holes, finishes, etc.) to adapt it to the installation of extra
equipment or for any other reason; THE RESPONSIBILITY FOR ANY TYPE OFINTERVENTION NOT EXPRESSLY
AUTHORISEDIN WRITING BY SOLÉ S.A. BELONGS TO THE ONE WHO DEVELOPES SUCH WORK.
SOLÉ S.A. DECLARES THAT THE ENGINE CHARACTERISTICS ARE COMMENSURATE WITH THE PARAMETERS
PERMITED BY ESTABLISHED LAW REGULATIONS REGARDING THE EMISSION OF:
- AIRBONE NOISE
- POLLUTING EXHAUST GAS
WHEN USING THE MOTOR IN A CLOSEDENVIRONMENT THE EXHAUST FUMES MUST BECONVEYED OUTSIDE..
1.3.1 INFORMATION REGARDING RESIDUAL RISKS
The engine must be used in compliance with the manufacturer’s prescriptions (technical specifications, safety regulations, etc.).
Any modifications you make be previously authorized by the Manufacturer. If you use the engine beyond its application limits and
alter in any way the characteristics that are the responsibility of SOLÉ S.A., such use shall be considered improper and SOLÉ
S.A. declines all liability for the consequences (see notes regarding intended use in General Safety Notices 1.3).
DO NOT TAMPER WITH OR MODIFY ANY MECHANICALOR ELECTRICAL COMPONENTS OF THE ENGINE
WITHOUT PIOR WRITTEN AUTHORISATION FROM THE MANUFACTURER
1.3.2 SAFETY REGULATIONS
IT’S STRICTLY PROHIBITED TO PERFORM MAINTENANCE WORK WHILE THERE ARE ENGINE PARTS
MOVING.
IT’S STRICTLY PROHIBITED TO REMOVE OR TAMPER WITH THE SAFETY DEVICES
WHEN THE ENGINE IS RUNNING IT IS STRICTLYPROHIBITED TO TOUCH ANY PART OF IT
ALWAYS PROTECT THE HANDS WITH SAFETYGLOVES AND HEATRESISTANT CLOTHING WHEN
WORKING ON A HOT ENGINE
PROTECT THE RESPIRATORY PASSAGES WHEN WORKING IN THE VICINITY OF ENGINE EXHAUST GAS
