ENG - 3
03917401.ENG rev. 0
1. GENERAL INFORMATION
1.1 ENGINE MANUFACTURER’S IDENTIFICATION DATA
MANUFACTURER:
SOLÉ, S.A.
Ctra. de Martorell a Gelida, km 2
08760 MARTORELL
(BARCELONA) SPAIN
MODEL:
_____________________________
TRADE DESIGNATION:
MINI-74
MINI-74G
SM-105
SM-105G
______________________________
The above data can be quickly identified in the following position:
- Engine nameplate showing identification data (see Fig. 1.1)
- Markings stamped on the engine showing serial number (see Fig. 1.2)
The above data can be quickly identified in the following position:
- Engine nameplate showing identification data (see Fig. 1.1)
- Markings stamped on the engine showing serial number (see Fig. 1.2)
1.2 INFORMATION REGARDING TECHNICAL ASSISTANCE / MAINTENANCE OF THE ENGINE
Our after sale service is at your complete disposal to solve any problems that may arise or to supply any information you may
need. For ANY explanations refer to the “SERVICE SOLÉDIESEL” address booklet.
Optimal operation and efficiency of your new SOLÉDIESEL engine can only be guaranteed if original spare parts are used.
For “GUARANTEE” terms refer to the “GUARANTEE CARD”.
1.3 GENERAL SAFETY NOTICES
The engine is designed and built as a power unit for generating mechanical energy: ALL USES OTHERTHAN THE
PRESCRIBED APPLICATIONAUTOMATICALLY RELEASE SOLÉ S.A. FROMLIABILITY FOR DAMAGES THAT MAY ENSUE,
in any event, the use of products other than those agreed upon at the time of purchase, RELEASES SOLÉ S.A.FROM ALL
LIABILITY FOR DAMAGE TO THEENGINE OR PROPERTY OR INJURY TO PERSONS.
Although the engine is built in compliance with the most recent safety standards it is advisable to bear in mind that moving parts
are always potentially dangerous. Therefore, never attempt to work on parts of the engine while they are in motion and make
sure that there are no persons in the vicinity of the engine before starting it.
The standard engine can run at ambient temperatures between -18 ºC a +45 ºC.
Fig. 1.1
Fig. 1.2.
Mounting order
Number
