37 • Recommended Wiring Diagrams
_______________________________________________________________________________________________
5.12
Control Input #7
Notes:
Switch D can be used as a Test
input/RESET/MULTI SOFT STOP (optional) as
programmed in I/O PROGRAMMING
PARAMETERS. Refer to section
7.8.7 page 73.
MULTI SOFT STOP is applicable only when an
optional software for MULTI SOFT STOP is
installed.
RESET function requires a momentary contact
to operate.
Test function is a unique feature of the HRVS-
DN to test the operation of the firing system of
the HRVS-DN. Refer to section
14.3 page 121.
Drawing shows Control Supply and Control
Input from the same source. Refer to section
5.2 and
5.3 for Control Supply and Control
Input from separate sources.
5.13
Control Input #8
Notes:
Switch D can be used as a DUAL
ADJUST/RESET as programmed in I/O
PROGRAMMING PARAMETERS. Refer to
section
7.8.7 page 73. Refer also to section
5.9 page 34.
RESET function requires a momentary contact
to operate.
Drawing shows Control Supply and Control
Input from the same source. Refer to section
5.2 and
5.3 for Control Supply and Control
Input from separate sources.
