SolarEdge L30US-IB00, User Manual

Page: 11 / 78

3 L30US-IB80, L30US-IB00, L40US UPS
2. Important Safety Instructions (Save These Instructions)
SAVE THESE INSTRUCTIONS! This manual contains important instructions, for models
L30US-IB80, L30US-IB00, and L40US, that should be followed during installation and
maintenance of the UPS and batteries.
CAUTION!
To reduce the risk of fire, connect only to a circuit provided with DC 160
amperes (for 30kVA External DC Circuit Overcurrent Protective Device) or with
DC 200 amperes (for 40kVA External DC Circuit Overcurrent Protective Device)
maximum branch circuit over current protection in accordance with the
National Electric Code, ANSI/NFPA 70”.
A label of this text, or equivalent text in your language, must be installed on the UPS a nd on
the backfeed isolator protection if it is installed remotely from the UPS.
CAUTION! (UPS having internal batteries): Risk of electrical shock – Hazardous
live parts inside this unit are energized from the battery supply even when the
input AC power is disconnected.
CAUTION! (No user-serviceable parts): Risk of electrical shock, do not remove
cover. No user serviceable parts inside. Refer servicing to qualified service
personnel.
CAUTION! (Non-isolated battery supply): Risk of electric shock, battery circuit is
not isolated from AC input, hazardous voltage may exist between battery
terminals and ground. Test before touching.
WARNING! (Fuses): To reduce the risk of fire, replace only with the same type
and size of fuse.
WARNING! Unit intended for installation in a controlled environment.
WARNING! Do not dispose of batteries to a fire, the battery may explode.
WARNING! When backfeed protection is needed by local area regulations and codes, please
note that it is not a part of the system design and you must install an external automatic
isolation device on site, in order to prevent dangerous voltage or energy at the input of the
isolation device. The device must be rated according to the system specifications and must
open within 15 seconds after the upstream power supply fails.
HAZARD! If those
instructions are not followed it may cause death or serious injury.