14
User manual
With the switch for selecting the mode of operation you can select between 6 different
modes of operation. The selection is valid for those heating circuits, which are not controlled
with a room unit. Warming of domestic hot water is active, if the d. h. w. warming is activated
on the controller or room unit DD2.
Night temperature: Room heating operates dependent from setting of
the night temperature on the controller.
D. h .w. warming is turned on.
D. h. w. warming: The operation mode switch is set in this position, if
you want to turn off the heating at the end of a heating season and let the
d. h. w. warming turned on.
Manual operation: This mode of operation is used for measuring the
smoke gases emissions or when the controller is broken down. Controller
turns on the burner and all circulation pumps.
Heating OFF: The operation mode switch is set in this position, if you
want to turn off the heating and d. h. w. warming at the end of a heating
season.
OPERATION MODE AND TEMPERATURE SETTINGS
SWITCH FOR SELECTING THE OPERATION MODE
Room heating: Room heating is operating in accordance to the time
program P1 or P2 of the controller program timer.
Day temperature: Room heating operates dependent from setting of the
day temperature on the controller.
D. h .w. warming is turned on.
O3060008
stran 14
torek, 15. julij 2008 07:51
Standardizirana barva 1
