13
User manual
- - -
- sensor is not connected
- cable or sensor is disconnected
- sensor short circuited
For the mixing and direct heating circuits there are two time programs (P1 and P2) available.
You can select the desired time program by pressing the navigation button. Mark P1 or P2
begins to flash. Now you can select the desired time program by turning the navigation but-
ton and confirm the selection with pressing the button again.
Selecting the P1 or P2 time program:
ERROR MESSAGES
A sensor that is not
working properly.
If you notice any unexpected behavior of the controller, it is
probable that one of the sensors has broken down. You can
test the proper operation of the sensors in basic display by
turning the navigation button. If a sensor is not working prop-
erly, an indicator or appears next to its symbol
for temperature.
Temperature sensors status description :
Error message.
O3060008
stran 13
torek, 15. julij 2008 07:51
Standardizirana barva 1
