24
Settings manual
The last and most important item on
the display is the timeline with a
graphical display of a time program for
a selected day. Dark fields represent
heating intervals of the day tempera-
ture, the rest is heating to the night
temperature.
Use the button to move the cursor
(flashing line) along the timeline.
A time reading, representing the cur-
sor’s position on the timeline is dis-
played on the screen. When the cursor
reaches daytime temperature interval,
the display shows a time of the begin-
ning and end of the interval or opera-
tion.
To change the beginning or end of the
time interval, move the cursor inside
the interval. Now press the button and
the cursor will be placed to the begin-
ning of the interval, from where you
can move it along the timeline with the
button. When you find the preferred
time of the beginning of the time inter-
val, confirm it by pressing the button.
Now the cursor will be placed to the
end of the interval, from where you can
again move it to the left or to the right
and confirm the position by pressing
the button.
You can add a new interval by placing a cursor at the preferred
beginning of the interval and pressing a button. Now use the but-
ton to find the end of the interval and press it again. A new day-
time temperature time interval has been created.
Adding new
heating intervals
To erase an interval, select it and press the button, then drag the
beginning of the interval all the way to its end and press the button
again. The interval has been erased.
Deleting intervals
On a timeline for a selected day, you can set only three
day temperature intervals.
Changing the
heating intervals
O3060008
stran 24
torek, 15. julij 2008 07:51
Standardizirana barva 1
