I N T R O D U C T I O N
The Solaira Cosy XL heater produces radiant heat like the sun, warming people and objects
rather than the air in between. It is mounted on an adjustable bracket that allows the heat to
be directed exactly where it is required. Its attractive, lightweight design means that it is
effective yet unobtrusive. The Cosy XL infrared radiant weatherproof heater is designed for
indoor and outdoor use.
Please read the following instructions carefully before use. The safety of this heater is
guaranteed only by its correct usage in accordance with these instructions, therefore
they should be retained for future reference.
Before using this appliance:
1. Check that the voltage indicated on the units rating label corresponds to the mains
supply voltage.
2.
Do not install the heaters less than the minimum height from the floor as specified below
in the specification - Table. 1.
3. Ensure that the heater has been securely fastened in its final mounting position.
4.
WARNING
- This appliance must be grounded!
5.
WARNING
- Keep the mains cord away from the body of the heater which will get hot
during use.
6.
If a socket outlet is used do not position the outlet immediately behind the heater.
7. Avoid the use of an extension cord with this product.
8. Do not cover or obstruct the heater while it is in use.
9. Do not insert any object through any slot or opening in the heater.
10. Do not use if guard is not present.
11.
WARNING
- When replacing the emitter or cleaning the unit, ensure that the 3-pin 120
volt plug is removed from its socket outlet or if hard wired circuit is disconnected from the
mains supply.
Note
: always ensure that the emitter is cool before handling.
12. Do not handle the halogen emitter with bare hands. If it is inadvertently
touched, remove finger marks with a soft cloth and methylated spirit or
rubbing alcohol. Otherwise, the marks will burn into the quartz emitter during
use causing premature heater failure.
13. The heater is not intended for use by young children and must be supervised by a
responsible person at all times.
14. Always remove the 3-pin 120 volt plug on the 120 volt heater if it is not being used.
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
4
