M A I N T E N A N C E
CAUTION:
Unplug/Switch off unit from the mains supply before replacing emitter or any
maintenance procedure including cleaning.
CAUTION:
Should dust or dirt appear on the reflector, it is recommended that that the guard and
emitter are removed and the reflector is wiped with a lint-free cloth before reassembling (see
emitter replacement instructions).
NOTE: For replacement emitters or spare parts (see diagram on back page) please contact
your local distributor quoting model type and rating from rating label. It is very important
that your replacement emitter is exactly the same as the one it was supplied with. Failure
to fit the exact same type can cause the heater to prematurely fail.
!
Fig. D
CAUTION:
Please ensure that the length of wires on the replacement emitter are the same as
shown in the diagram below (Fig. D). The sleeves should be shorter than the overall length of the
wires to allow them to pass through the terminal box sealing gasket. The stripped ends should be
fitted with plain tube crimps to ensure good connections are made.
7
Y O U R R E P L A C E M E N T E M I T T E R
