9. To disconnect heater, (if hard wired) turn controls to off or remove 3-pin
120 volt plug from outlet.
10. Connect to properly grounded outlets only.
11. Do not insert or allow foreign objects to enter any opening as this may
cause an electric shock or fire, or damage the heater.
12. To prevent a possible fire, do not block openings in any manner.
13. A heater has hot parts inside. Do not use it in areas where gasoline,
paint, or flammable liquids are used or stored.
14. Avoid the use of an extension cord because the extension cord may
overheat and cause a risk of fire.
15. Do not cover or otherwise obstruct the heater.
16. Do not touch the heater during operation as the body becomes
very hot and cause burns. Particular attention has been given
where children and vulnerable people are present.
I M P O R TA N T I N S T R U C T I O N S
I M P O R TA N T I N S T R U C T I O N S
I M P O R TA N T I N S T R U C T I O N S
I M P O R TA N T I N S T R U C T I O N S
S AV E T H E S E I N S T R U C T I O N S
S AV E T H E S E I N S T R U C T I O N S
S AV E T H E S E I N S T R U C T I O N S
S AV E T H E S E I N S T R U C T I O N S
G R O U N D I N G I N S T R U C T I O N S
For the 120 volt heater. The cord has 3-pin grounded plug.
For the 208 / 240 volt heater. The cord from the terminal box must be hard
wired.
3
