Sola A-6000/NS PLUS Manual Download Page 5

Page: 5 / 44

INTRODUCTION

1- INTRODUCTION

It is essential to READ AND FOLLOW THE INSTRUCTIONS AND RECOMMENDATIONS in this manual

before operating the

SEED DRILLER

A-6000/NS PLUS

. Careful reading enables maximum operator

efficiency, prevents accidents and damage, and increases the seed driller’s capacity and life expectancy.

Please ensure that this manual has been read by any person involved in performing operational tasks,

(including preparation, dealing with mechanical problems and supervising the machine), maintenance

(inspection and technical assistance) and transport.

For your safety, please follow these technical safety instructions as

SOLÀ

will not be responsible for

damages caused by not observing the information provided.

In the first chapters you will find the Technical Characteristics and Safety Instructions, as well as some

essential sowing concepts. Basic concepts that are required to operate the machine are explained in the

Starting and Maintenance sections.

The last part of this manual consists of Dosage Tables, detailed by seed type.

SOLÀ

RETAINS THE RIGHT TO MODIFY ILLUSTRATIONS, TECHNICAL DATA AND WEIGHTS INDICATED IN

THIS OPERATING MANUAL, IF THESE CHANGES HELP TO IMPROVE THE QUALITY OF THE SEED DRILLERS.

Summary of Contents for A-6000/NS PLUS













































Search results

Summary of Contents for A-6000/NS PLUS

Reviews:

Related manuals for A-6000/NS PLUS

Brands by name

Popular brands

Sola A-6000/NS PLUS, Manual

Search results

Summary of Contents for A-6000/NS PLUS

Reviews:

Related manuals for A-6000/NS PLUS

Brands by name

Popular brands