15
COMMISSIONING
5.5 LOADING AND UNLOADING THE
HOPPER
For a safe and fast hopper load, the best option is using a
screw conveyor. An hydraulic crane can also be used for lift-
ing the BIG BAG and put it on top of the hopper for coupling
it; follow the manufacturer instructions.
IMPORTANT:
BEFORE EMPTYING THE HOP-
PER, MAKE SURE THAT NOTHING REMAINS IN-
SIDE THE HOPPER.
BEFORE FILLING THE HOPPER, MAKE SURE THAT
THE EMPTYING TRAP DOORS ARE CLOSED.
For
FILLING
the hopper:
1-
Pull the lock (1, Fig 16) for releasing the hopper landing,
then move the ladder until it reaches the horizontal po-
sition.
Fig. 16
1
Fig. 17
2
2-
Remove the locking pin (2, Fig 17) and slightly pull the lad-
der upwards for releasing the locking point (indication, Fig.
17).
3-
Pull the ladder horizontally up to the end of its trajectory.
Then, move it until it reaches the vertical position and the
stop end (Fig. 18).
Fig. 19
Fig. 18
4-
Remove the fastening rubber bands of the canvas (Fig. 19).
5-
Take the handle at the ladder side (Fig. 20) and place it at
the end of the canvas (Fig. 21). Turn the handle for remov-
ing the canvas (Fig. 22).
Fig. 20
Fig. 22
Fig. 21
IF THE CANVAS CANNOT BE REMOVED, MAKE
SURE THAT ALL FASTENING RUBBER BANDS
HAVE BEEN REMOVED.
6-
Fill the hopper with the seeds.
7-
Once the hopper is full, close the canvas cover, keep the
handle, fold the access ladder and lock the locking pin.
FOLD THE STAIRS AFTER LOADING OR INSPECT-
ING THE HOPPER.
For
EMPTYING
the hopper:
1-
Place a container or sack in front of the dispenser empty-
ing trap door (Fig. 23).
2-
Turn the handle to the left for opening the trap door and
emptying the hopper (1, Fig. 23).
3-
When finishing this task, close the trap door by turning
the handle to the right (1, Fig. 23)
Fig. 23
1
Close
Open
Summary of Contents for A-6000/NS PLUS
