Sola A-6000/NS PLUS, Manual

Page: 14 / 44

14
COMMISSIONING
Fig. 12
OPEN
CLOSED
For machine versions with track eraser, this element can be
excluded with the stopcock (Fig. 12) placed between the
hopper and the seed drill. See the stopcock positions in the
images, being:
OPEN
: for including the track eraser, and
CLOSED
: for excluding the track eraser.
The machine also includes security locks (1, Fig. 13) that must
be used for securing the lateral equipment while the ma-
chine is transported. The image shows the trigger in locked
position.
Fig. 13
1
2
IF THE FOLDABLE PARTS DO NOT DESCEND
WHEN PRESSURING THEIR HYDRAULIC CIR-
CUIT, MAKE SURE THAT THE SECURITY LOCKS
ARE UNLOCKED (1, FIG. 13). OTHERWISE, FOLD
THE EQUIPMENT AGAIN AND ADJUST THE
FOLDING STOPS (2, FIG. 13).
WHEN OPENING OR CLOSING THE FOLDING
PARTS AND THE TRACK MARKERS, MAKE SURE
THAT NOBODY AND NOTHING IS NEAR THE
MACHINE OR ALONG THE TRAJECTORY OF THE
MOVABLE PARTS.
ALWAYS PERFORM MACHINE MAINTENANCE
WORKS WITH THE HYDRAULIC CONNECTIONS
UNPLUGGED.
KEEP THE HYDRAULIC HOSE LINES IN GOOD
CONDITION. THE PRESSURE OIL CAN PENE-
TRATE THE SKIN CAUSING SERIOUS INJURIES.
USE ONLY THE HYDRAULIC HOSE LINES PRO-
VIDED BY THE MANUFACTURER.
5.4 TRANSPORTATION POSITION
With the machine coupled with the tractor and the hydraulic
circuits connected to the tractor distributor, follow the steps
below for transporting the machine:
Fig. 14
1- Fold the track markers.
2- Lift the lateral equipment and make sure that the security
locks are locked (Fig. 15).
Fig. 15
3-
If the track eraser is down, make sure that its stopcock is
open.
4-
Lift the seed drill and track eraser up to their maximum
position.
AFTER FOLDING THE MACHINE, AND BEFO-
RE TRANSPORTING IT, MAKE SURE THAT THE
TRACK ERASER HAS BEEN LIFTED; OTHERWISE,
VERIFY THAT THE STOPCOCK IS OPENED AND
REPEAT THE PREVIOUS STEPS IN THIS SECTION.
AVOID THE MOVEMENT OF THE MOVABLE ELE-
MENTS.