manualshive.com logo in svg

Sokkia iM-50 Series, Operator'S Manual, Page: 44 / 228

Share
Download
Sokkia iM-50 Series Operator'S Manual Download Page 44

39

12. DISTANCE MEASUREMENT

3. Press 

[S-LEV]

.

<Aiming> is displayed.
The intensity of the light of the returned signal is displayed 
by a gauge.

• The more 

 displayed, the greater the quantity of 

reflected light.

• If “*” is displayed, only enough light for the measurement is 

returned.

• When “*” is not displayed, accurately resight the target.
• Press 

[BEEP]

 to make a buzzer sound when measurement 

is possible. Press 

[OFF]

 to shut off the buzzer.

• Press 

[MEAS]

 to start distance measurement.

4. Press 

{ESC}

 to finish signal checking and return to OBS 

mode.

• When 

 is displayed persistently, contact your local dealer.

• If no key operations are performed for two minutes, the display automatically returns to the OBS mode 

screen.

An angle can be measured at the same time as the distance.

PROCEDURE

1. Sight the target.

2. In the first page of OBS mode, press 

[MEAS]

 to start 

distance measurement.

When measurement starts, EDM information (distance 
mode, prism constant correction value, atmospheric 
correction factor) is represented by a flashing light.

A short beep sounds, and the measured distance data (SD), 
vertical angle (ZA), and horizontal angle (HA-R) are 
displayed. 

3. Press 

[STOP]

 to quit distance measurement.

12.2 Distance and Angle Measurement

MEAS

SHV

MEAS

0SET

COORD

OBS

SD
ZA
HA-R

F i n e

OBS

SD

ZA

HA-R

STOP

Summary of Contents for iM-50 Series





































































































































































































































Reviews:

No comments