29
9. CONNECTING TO EXTERNAL DEVICES
5. Select "S-Type".
• "T-Type" is for an instrument using GTS commands.
6. Perform communication settings for S-type.
Items set and options (*: Factory setting)
(1) Check sum
: Yes/No*
• Changing communication settings during
Bluetooth
communication will cancel the connection.
• No changes for the factory setting are necessary as long as
connecting to a recommended program on the data
collector. If connection can not be established, check the
communication settings of iM and the data collector.
7. Select "
Bluetooth
" in <Communication Setup>.
Register the Bluetooth address (BD_ADDR) displayed here
in the paired device set as "Master".
8. Press
{ENT}
to finish settings. Move on to the
Bluetooth
communication.
"9.2 Communication between the iM and Companion
Device"
Bluetooth
device address
This is a number unique to one particular
Bluetooth
device used to identify devices during communication.
This number consists of 12 characters (numbers 0 to 9 and letters from A to F).
Some devices may be referred to by their
Bluetooth
device address.
• The followings are communication formats compatible with the iM.
Depending on the communication format used, select T type/S type.
• When selecting "T-type" in step 3, the following items are displayed.
(1) CR, LF
Yes/No*
(2) ACK mode
Standard*/Omitted
(3) ACK/NAK
Yes/No*
T type
GTS (Obs / Coord), SSS (Obs / Coord)
S type
SDR33, SDR2X
Comms Type
S type
T type
Check sum :
No
Comms setup
Comms mode
Comms type
RS232C
Bluetooth
BD_ADDR
:ABCDEF012345