Sokkia iM-50 Series Operator'S Manual Download Page 101

Page: 101 / 228

21. MISSING LINE MEASUREMENT

• When

[MOVE]

is pressed, the last target measured

becomes the new starting position to perform missing line
measurement of the next target.



"21.2 Changing the Starting Point"

5. Press

{ESC}

to end missing line measurement.

PROCEDURE Calculating from input coordinates

1. In the third page of OBS mode screen, press

[MLM]

, then

select "MLM".

2. Press

[COORD]

on the second page.

3. Input coordinates for the 1st target and press

[OK]

• When you wish to read in and set coordinate data from

memory, press

[LOAD]



"13.1 Entering Instrument Station Data and Azimuth

Angle PROCEDURE Reading in Registered
Coordinate Data"

4. Select "PT2" and press

{ENT}

to proceed to 2nd target

input.

5. Input coordinates for the 2nd target and press

[OK]

The following values are displayed:
SD: Slope distance of the starting position and 2nd target.
HD: Horizontal distance of the starting position and 2nd
position.
VD: Height difference of the starting position and 2nd target.

• Target height of the starting position and 2nd target can be

input.

Press

[Tgt.h]

on the second page.

Input the target heights and press

[OK]

• Press

[COORD]

to re-input coordinates for the first or 2nd

targets.

• Pressing

[REC]

displays the result recording screen for

missing line measurement. Pressing

[OK]

records the

measured results.

MLM

Occ.Orien.

MLM

Set PT1

HA-R

140

COORD

S/%

t.h

20.000

30.000

40.000

PT1

REC

LOAD

Input Coord

PT1

PT2

MLM

SD
HD
VD

20.757m
27.345m

1.012m

REC

MOVE

MEAS

MLM

Target height

P T 2

1.500m

P T 1

1.500

Summary of Contents for iM-50 Series





































































































































































































































Search results

Summary of Contents for iM-50 Series

Reviews:

Sokkia iM-50 Series, Operator'S Manual, Page: 101 / 228

Search results

Summary of Contents for iM-50 Series

Reviews: