manualshive.com logo in svg

Sokkia iM-50 Series, Operator'S Manual, Page: 225 / 228

Share
Download
Sokkia iM-50 Series Operator'S Manual Download Page 225

220

41. REGULATIONS

California 
and NY, 
U.S.A.

Recycling
Batteries

 Canada

ICES-Class B

This class B digital apparatus meets all requirements of Canadian 
interference-Causing Equipment Regulations.
Cet appareil numérique de la class B respecte toutes les exigences du 
Réglement sur le matérique brouilleur du Canada.

This Class B digital apparatus complies with Canadian ICES-003
Cet appareil numerique de la Class B est conforme a la norme NMB-003 
du Canada.

Operation is subject to the following two conditions: (1) this device may not 
cause interference, and (2) this device must accept any interference, 
including interference that may cause undesired operation of this device.

This equipment complies with IC radiation exposure limits set forth for an 
uncontrolled environment and meets the  RSS-102 of the IC radio 
frequency (RF) Exposure Guidelines. This equipment has very low levels 
of RF energy that it deemed to comply without maximum permissive 
exposure evaluation (MPE). But it is desirable that it should be installed 
and operated keeping the radiator at least 20cm or more away from 
person's body.

Region/

Country

Directives/ 

Regulations

Description

Summary of Contents for iM-50 Series





































































































































































































































Reviews:

No comments