SOFTLINK WB169-SI2, Instruction Manual

Page: 26 / 44

Table 2: Overview of WB169-SI2 module configuration parameters
Item Name Value Description Default.
1 Timezone 1 - 11 Setting of time zone 1
2 MBUS ID 0 - 99999999 Serial number (M-Bus address) read only
3 MBUS Version 0 - 255 Generation or version (M-Bus address suppl.) read only
4 MBUS Manufacturer code Device producer (M-Bus address suppl.) read only
5 MBUS Medium code Medium (M-Bus address suppl.) 07
6 MBUS Manuf. info 0 - 29 char. Device name SI4
7 Multiplier 1 - 65535 Counter value multiplier 1
8 Divisor 1 - 65535 Counter value divisor 1
9 DIF code Data field format (M-Bus) 84 0n
10 VIF code Measured quantity and unit (M-Bus) 13
11 Mode desc. Filter and trigger edge setting falling, quick
12 Analog desc. Analog mode setting digital
13 Alarm desc. Alarm mode setting none
14 Leak period 0 - 1090 Leak detection period (
”
Leak” function) 0
15 Leak zero time 0 - 1090 Zero consumption period (
”
Leak” function ) 0
16 Burst limit 0 - 65535 Alarm limit value (
”
Burst” function) 0
17 Burst periode 0 - 1090 Burst check time (
”
Burst” function) 0
18 Radio Power 1 - 5 Transmitting power 5
19 Comm. mode 1 - 2 Communication mode 1 (N1)
20 Channel 1 - 7 Frequency channel 1
21 Periode 1 - 65535 Broadcasting period in minutes 60
22 Send mask 1 - 15 Setting of info message content 3
23 Encryption code Encryption key individu´ aln´ı
24 Next send curr. status Time to broadcasting of next info-message read only
25 No of sent msgs curr. status No of sent messages since last reset read only
26 No of recv. msgs curr. status No of received messages since last reset read only
27 Config. Version curr. status No of stored images since last FLASH erasure read only
28 SW Version curr. status Software version and date of issue read only
•
red colour - parameters that are not recommended to change
•
grey colour - values that cannot be changed (
”
read only”)
Yellow colouring of the
”
Item” number highlights the parameters, that can be configured by USB-IRDA optical
converter as described in chapter 3.2
”
Setting of parameters by using of optical
”
USB-IRDA” converter”.
WB169-SI2 23