Sofar solar 3.3~12KTLX-G3 User Manual Download Page 6

Page: 6 / 89

SOFAR 3.3~12KTLX-G3

User manual

Outline

This manual is an integral part of SOFAR 3.3~12KTLX-G3. It describes the
assembly, installation, commissioning, maintenance and troubleshooting of the
product. Please read it carefully before operating.

Scope of Validity

This manual contains important instructions for:

SOFAR 3.3KTLX-G3

SOFAR 4.4KTLX-G3

SOFAR 5KTLX-G3-A

SOFAR 5.5KTLX-G3

SOFAR 6.6KTLX-G3

SOFAR 8.8KTLX-G3

SOFAR 8.8KTLX-G3-A

SOFAR10KTLX-G3-A

SOFAR 11KTLX-G3

SOFAR 11KTLX-G3-A

SOFAR 12KTLX-G3

Target Audience

This manual is for qualified electricians. The tasks described in this manual only
can be performed by qualified electricians.

Symbols Used

The following types of safety instruction and general information appear in this
document as described below:

“Danger”indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Danger

“Warning”indicates a hazardous situation which, if not avoided,

could result in death or serious injury

Warning

“Caution”indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury

Caution

“Attention”indicates there are potential risks, if fail to prevent,

may lead to equipment cannot normally or property damage.

Attention

“Note”provides additional information and tips that are valuable

for the optimal operation of the product.

Note

Summary of Contents for 3.3~12KTLX-G3


























































































Search results

Summary of Contents for 3.3~12KTLX-G3

Reviews:

Related manuals for 3.3~12KTLX-G3

Brands by name

Popular brands

Sofar solar 3.3~12KTLX-G3, User Manual

Search results

Summary of Contents for 3.3~12KTLX-G3

Reviews:

Related manuals for 3.3~12KTLX-G3

Brands by name

Popular brands