manualshive.com logo in svg

Sofar solar 3.3~12KTLX-G3, User Manual

The Sofar solar 3.3~12KTLX-G3 is a highly efficient and reliable solar inverter. To ensure smooth installation and optimal performance, don't forget to download the user manual for free! Find the comprehensive manual on our website manualshive.com to easily access all the information you need.

Share
Download
background image

SOFAR 3.3~12KTLX-G3

User manual

Copyright © Shenzhen SOFARSOLAR Co., Ltd.

IV

Preface

Notice

Thank you on your purchase of a SofarSolar inverter. This manual contains
important safety and operational information that assist you in using this product.
Please observe all applicable safety regulations that have been mandated by your
local electrical supplier.

Save these instructions!

This manual should be considered a piece of safety equipment and therefore
must accompany the device, even when it is transferred to another user or site.

Copyright Declaration

The copyright of this manual belongs to Shenzhen SOFARSOLAR Co. Ltd. Any
corporation or individual should not plagiarise, partially copy or fully copy it
(including software, etc),and no reproduction or distribution of it in any form or
by any means. All right reserved.
SOFARSOLAR reserves the right of final interpretation. This manual is subject
to change according to user’s or customer’s feedback. Please check our website
at http://www.sofarsolar.com for latest version.

The current Version updated at 20210812.
The current Version is V1.01-AU.

Shenzhen SOFARSOLAR Co., Ltd

Location: 401, Building 4, Antongda Industrial Park, District 68, XingDong

Community, XinAn Street, BaoAn District, Shenzhen, China.

Postcode: 518000

Company Website: www.sofarsolar.com

Email: [email protected]

Summary of Contents for 3.3~12KTLX-G3


























































































Reviews:

No comments

Related manuals for 3.3~12KTLX-G3

Vdwall SC-12 User Manual preview
SC-12
Brand: Vdwall Pages: 12
Vdwall LedSync850M Quick Manual preview
LedSync850M
Brand: Vdwall Pages: 5
Omega OTEC IEWQ Series Technical Manual preview
OTEC IEWQ Series
Brand: Omega Pages: 29
µ-Dimension ADI-12W6 Owner'S Manual preview
ADI-12W6
Brand: µ-Dimension Pages: 17
µ-Dimension 12WA7N Owner'S Manual preview
12WA7N
Brand: µ-Dimension Pages: 16
µ-Dimension 12/400N Owner'S Manual preview
12/400N
Brand: µ-Dimension Pages: 6
µ-Dimension 12/1800N Owner'S Manual preview
12/1800N
Brand: µ-Dimension Pages: 8
Vector Lil' Beaver 2.0 User Manual preview
Lil' Beaver 2.0
Brand: Vector Pages: 16
SMA Sunny Island 3324 User Manual preview
Sunny Island 3324
Brand: SMA Pages: 80
Nibe SOLAR FP215 P Installer Manual preview
SOLAR FP215 P
Brand: Nibe Pages: 76
Tripp Lite N035-001 Owner'S Manual preview
N035-001
Brand: Tripp Lite Pages: 4
TV One C2-2450A Operation Manual preview
C2-2450A
Brand: TV One Pages: 116
Delta M10A Quick Installation Manual preview
M10A
Brand: Delta Pages: 108
CHIYU CYT-200SC User Manual preview
CYT-200SC
Brand: CHIYU Pages: 29
ARTEX 570-1000 Revision A Operation Manual preview
570-1000 Revision A
Brand: ARTEX Pages: 28
CYP EL-6010-4K22 Operation Manual preview
EL-6010-4K22
Brand: CYP Pages: 40
RGBlink 601-0232-01-0 Quick Start Manual preview
601-0232-01-0
Brand: RGBlink Pages: 9
Richtek RT7285C Manual preview
RT7285C
Brand: Richtek Pages: 15

Brands by name

Popular brands

Load more brands