25
EN
ISOM DIGIWARE - 546780C - SOCOMEC
5. INSTALLATION
The following paragraphs describe the installation of ISOM Digiware and associated sensors.
5.1. Recommendations and safety
Refer to the safety instructions (section "2) Hazards and Warnings", page 5)
5.2. Installing ISOM Digiware units
5 .2 .1 . ISOM Digiware L-60, F-60, T-15 – mounted on DIN rail
L
1
2
1.38 in
35 mm
0.29 or 0.59 in
7.5 or 15 mm
PLEASE NOTE:
•
When the ISOM T-15 adapter is mounted on DIN rail, do not fix the core balance transformer ΔIP to
the T-15
• Make sure the housing (e.g. enclosure) is large enough to take the ISOM Digiware L-60 (enough
thermal ventilation around the device)
•
Make sure that the DIN rail is earthed
•
Do not install the ISOM T-15 or ISOM Digiware F-60 close to or touching any live parts, or close to
breakers or other equipment carrying dangerous voltage (does not apply to ISOM Digiware L-60)
