60
EN
ISOM DIGIWARE - 546780C - SOCOMEC
10.1.2.3.
Configuration of the insulation
ISOM L-60
The "Common" screen defines the general settings of the device:
1) the network profile:
Choosing the profile is an easy way to support the measurement algorithm on the intended application, with
improved filtering/measurement times.
You can choose between 3 profiles:
• Custom
• Cabinet
• Control/command
2) The booster startup mode for finding the fault:
• Automatic: start the "LCI" booster when the "ALARM 2" threshold is reached
•
Manual: start up the "LCI" booster only with the BP "INJ START/STOP"
3) Manual test input:
Defines which ON/OFF input (1 to 4) on the device is used to carry out a remote internal test of the device.
4) Operating mode of the relays:
Defines if these relays are active or stopped.
