56
EN
ISOM DIGIWARE - 546780C - SOCOMEC
10. CONFIGURATION
Configuration can be carried out using the Easy Config configuration software or directly from the remote display. The
Easy Config software is used to configure ISOM Digiware directly via RS485 or USB. Easy Config must be installed
before using the USB connection. To set the parameters from the remote display D-75 or D-55, refer to the manual
for the display.
10.1. Configuration using Easy Config
10 .1 .1 . Connection modes
Configuration using Easy Config (USB)
Easy Config
Supervision
MODBUS TCP
USB
ISOM F-60
Configuration using Easy Config via a display
Supervision
MODBUS TCP
Easy Config
ISOM Digiware D-55 / D-75
USB