63
EN
ISOM DIGIWARE - 546780C - SOCOMEC
10.1.2.4.
Configuration of inputs-outputs (I/O)
The ISOM L-60 has 4 I/Os which are fully configurable.
In this screen you can set each I/O separately:
1) Function of the I/O
Defines if it is used as an input or an output
2) Name:
Name the I/O
3) Mode:
Defines the I/O operating mode:
As an input, you can set the following 4 modes:
•
Injection cutoff
• External TEST
• External RESET
• Measurement restart
4) Type:
Defines if it is active, either in an open or closed state.
