Socket VMZV6 FLEX-ATX, User Manual

Page: 57 / 61

3-31
7.
After the backup,prompt: Are you sure to program?(Y/N) Press <Y> to start
to program the new BIOS information into the flash ROM. When the pro-
gramming is finished.You may press <F1> to reset the PC or <F10> to Exit
the AWDFLASH.
WARNING!!!
If you encounter problems while updating the new BIOS, DO NOT turn off
your system since this might prevent your system from booting up. Just repeat
the process, and if the problem still persists, update the original BIOS file you
saved to disk above. If the Flash Memory Writer utility was not able to
successfully update a complete BIOS file, your system may not be able to
boot up. If this happens, your system will need service.
NOTE!!!
The previous screen displays are provided as example only and may not
reflect the screen contents displayed on your system.
CMOS Setup Utility