Socket VMZV6 FLEX-ATX, User Manual

Page: 15 / 61

CPU Jumper Setting
After installing the CPU, you must set the clock selection jumpers to match the fre-
quency of the CPU. Find the jumpers labeled
JP8
¢ ¢
¢ ¢ ¢ JP9
¢ ¢
¢ ¢ ¢ JP10 and SW1 set the
jumpers according to the figure below and table for CPU Clock frequency. We rec-
ommend them to users.
Hardware Installation
2-4
Caution !!
we don’t recommend user to try overclock, it may damage your CPU and result in
a slower speed. Please think carefully before you use overclock function.
We introduce you how to clear CMOS, and enter into system BIOS, it could help
you accomplish CPU setting in BIOS easyly.
Clear CMOS: JP5 Clear CMOS: JP5
Clear CMOS: JP5 Clear CMOS: JP5
Clear CMOS: JP5
To Clear CMOS, please follow the steps below:
1. Power off the system and unplug the chassis AC power cord.
2. Short JP5at pin 2-3 for few seconds.
3. Set JP5 back to its Normal position at pin1-2
4. Plug the AC power cord to the chassis.
5. Power on the system and load the BIOS set up default.
JP5 Clear CMOS
Clear
CMOS
Normal
(Default)